How To Power Cycle Wyze Camera – Step By Step Guide

If your Wyze camera has a hard problem, the fix is easy, just power cycle it. Power cycling means turning your device off and on again. This process refreshes the device and its connections, often the solution to various problems.

Before you go ahead and power cycle your Wyze camera there are a few things you need to do. First, make sure your camera is properly connected to the WiFi network because all smart home cameras rely on WiFi to work. Also, double-check that your camera’s firmware is up to date. Once you have verified these aspects go ahead and power cycle your camera.

In this article, we will show you how to problem solve and power cycle to your Wyze camera.

How to Power Cycle a Wyze Camera

Power cycling, or simply turning a device off and on again, is a common troubleshooting method manufacturers recommend. Don’t let the fancy name intimidate you; it’s a soft reset that can effectively resolve issues.

To power cycle your Wyze Camera, start by unplugging it from the wall outlet to cut off power completely. Wait for about 20 seconds (although the manufacturer suggests 5 to 10) to ensure it’s fully discharged.

After the wait, plug the camera back in, turn it on, and you’re done! This simple strategy should determine any issues you are encountering, and your camera should have returned to its typical usefulness.

How Can I Power Cycle My Base Station?

When you need to power cycle your Wyze Base Station, it’s just like resetting the camera itself – a simple on-and-off process. Let’s dive in.

Firstly, grab the device you use to control the Wyze camera and disconnect it from the base station. Then, unplug the ethernet cable to cut off its data connection.

After that, locate the power cable at the back of the Wyze base station and unplug it. Wait patiently for about 20 seconds; this gives the base station enough time to fully discharge.

Once the waiting period is up, reconnect the power cable and the ethernet cable. Now, turn the base station back on. With any luck, this should resolve the issue you were experiencing.

How To Reset Your Wyze Camera?

How To Power Cycle Wyze Camera

When you’re troubleshooting issues at home, resetting your device to its factory settings is often a last resort. This means your camera will return to its original settings as it was when first purchased.

Be aware that this reset will delete all your data, including access point information. Once completed, you’ll need to reconnect your camera.

Keep in mind that if you’ve updated your Wyze camera’s firmware, it won’t revert to the original firmware. Let’s dive into resetting the Wyze camera.

First, remove the SD card. Then, locate and press the “setup” button for about 20 seconds. Keep holding it until you see a yellow light flashing.

Once the light flashes, you’ll know the reset is complete. Plug the camera back in, and you’ll be greeted with the setup page to start anew.

How Do I Power Cycle The WYZE Camera Remotely?

To power cycle your Wyze camera remotely, use the Wyze app on your smartphone:

  • Open the Wyze app and navigate to “Devices.”
  • Select your Wyze camera.
  • Tap the gear icon for settings.
  • Scroll down and choose “Restart Device.”
  • Confirm the restart.
  • Wait for the camera to power down and restart.
  • Check the Wyze app to ensure reconnection.

This simple process allows you to remotely troubleshoot connectivity issues, ensuring your Wyze camera stays online and functional without the need for physical interaction.

How To Power Cycle a WYZE Cam V2?

Power cycling a WYZE Cam V2 is just like restarting any other WYZE camera. But if you’ve tried restarting it multiple times and you still can’t connect to your WYZE Cam V2, you’ll have to do a Hard Reset. To power cycle your Wyze Cam V2, follow these quick steps:

  • Locate the power adapter connected to the Wyze Cam V2.
  • Unplug it from the power source.
  • Wait for about 10 seconds to ensure a complete power down.
  • Plug the power adapter back in.
  • Allow the camera to restart.
  • Check if the connectivity issue persists.

This straightforward process helps settle normal connectivity issues by giving your Wyze Cam V2 a quick reset. Ensure a seamless live feed and optimal performance with this simple power cycling technique.

How To Power Cycle a WYZE Cam V3?

First, try power cycling the camera by unplugging it and then plugging it back in. If it goes back to flashing red but doesn’t reconnect, you’ll need to set it up as a new device.

In the Wyze app on your iOS or Android device, go to the Home tab, tap the “+” sign, then select “Add Device” > “Cameras” and choose your camera. Follow the on-screen instructions to set it up again.

If the issue persists, perform a hard reset:

  • Remove any MicroSD card from the camera.
  • While the camera is plugged in, press and hold the setup button on the bottom for 10 seconds to reset it.
  • Wait at least 20-30 seconds for the camera to restart. This might take up to 3-5 minutes.
  • The LED light on the camera will change from solid red to flashing red, indicating it’s ready to be set up again.

Camera Fails To Connect To Network

If your camera isn’t connecting with the network, there are two or three stages you can take to troubleshoot the issue.

First, it’s crucial to ensure that you’re connected to a 2.4 GHz network because Wyze cameras only work on this frequency. You can check this by accessing your phone’s network settings. If you’re connected to a 5 GHz network, forget that network and adjust your router settings to provide a 2.4 GHz signal.

Next, try power cycling your Wyze Camera and base station. This normally includes switching them off, waiting for a few seconds, and then turning them back on. After this, your camera should connect to the network successfully.

Connecting Wyze Camera To New Wi-Fi Network

Here are the steps simplified for setting up your Wyze camera:

  • Install and open the Wyze app on your phone. Log in or sign up for an account.
  • Take out your Wyze camera and plug it into a power outlet. Wait for the yellow lights to appear.
  • Hold down the setup button on the back of the camera until you hear a message indicating it’s ready to connect.
  • In the Wyze app, select “Add a product” and choose Wyze Cam. Follow the setup instructions.
  • When prompted, connect to a 2.4 GHz Wi-Fi router.
  • Use the app to scan the QR code displayed on your mobile device screen with the camera.
  • Wait for confirmation that your Wyze Camera is connected to your Wi-Fi.

If you encounter any issues, refer to the Wyze app’s troubleshooting guide or contact Wyze support for assistance.

Final Thoughts

Power cycling your Wyze camera, whether remotely or on-site, is a fundamental troubleshooting step for addressing connectivity issues. By following the simple steps outlined above, you can effectively resolve common glitches and ensure optimal performance.

Remember to check for reconnection and test the camera’s functionality afterward. Incorporating power cycling into your routine maintenance can help maintain a reliable and seamless experience with your Wyze camera.

About U Shwe Sing

Hey, I’m U Shwe Sing. I’m a professional Digital Marketing specialist with 2 years of working experience in this sector. Generally, I prefer to write content in the digital marketing sector. I have written many articles to help people solve the problems. I have written articles on SmartHomeClever that address the issues of smart home electronic devices in their daily lives.

View all posts by U Shwe Sing →

Leave a Reply

Your email address will not be published. Required fields are marked *