If you’re new to Feit products, they’re a well-known brand specializing in smart lighting solutions. Generally, their equipment earns high ratings, and troubleshooting is usually straightforward in the rare event of an issue.
Setting up their Smart Bulbs is user-friendly, though, like anything tech-related, occasional problems can occur, regardless of your expertise. Once set up, enjoying your smart devices is a breeze with a stable internet connection – or so it should be in a perfect world.
In reality, smart devices may act up occasionally. If your Feit Smart Bulbs are giving you a hard time, don’t worry, you’re not alone. To assist you, we’ve crafted a handy step guide to get everything back on track.
How to Fix Feit Smart Bulb Not Connecting to Wi-Fi
Setting up your devices might encounter a few hurdles, but don’t worry—it’s a breeze to troubleshoot and resolve any issues. Before diving into the setup, double-check a few key points:
- Confirm you’re on a 2.4 GHz Wi-Fi network.
- Ensure your mobile device is connected to the same Wi-Fi network.
- Turn off any VPN or Ad Guard on your device temporarily.
- Start the light setup near your router, then move it to its final location.
- Check for any router network settings that might hinder device addition.
- Grant the Feit Electric app necessary permissions (location, Bluetooth, and network).
- Put the smart light in pairing mode, indicated by a continuous flashing.
- If everything seems fine, power cycle both your network devices and the smart light to refresh connections.
Always ensure your mobile device is on the same network, and try turning off cellular data. Additionally, keep the Feit Electric app updated for optimal performance. With these steps, you’ll be connecting and testing your lights in no time!
Using The Right Bandwidth
If your Smart Bulb turns out to be the culprit, the likely issue might be the use of the incorrect channel bandwidth. Notably, the Feit Smart Bulb doesn’t support the 5GHz bandwidth, a fact not prominently communicated by the company, leading many users to be caught off guard.
To address this, it’s advisable to check your network device settings and ensure it’s configured for the 2.4GHz channel. Fortunately, most modern routers make channel switching relatively straightforward. Access the admin control panel through the web interface, and within the available options, locate the setting to switch from 5 to 2.4GHz.
Once you’ve adjusted this setting, attempt to reconnect the LED bulb to the network. Hopefully, this adjustment will resolve the issue. It’s essential to troubleshoot and adjust these settings to ensure seamless integration with your smart devices.
Move Your Device Closer to the Router
To set up the Feit app successfully, make sure you have a reliable internet connection for finding, registering, and initializing the smart bulb during the initial setup. If your signal is weak, try moving the bulb closer to the router to improve signal strength.
It’s a good idea to start setting up your lights or any other smart devices near the router before moving them to their final location.
To evenly distribute your network throughout your home, make sure there are no dead spots. Smart devices can typically connect within a 30-foot radius, but this can vary depending on obstacles and interference.
Consider getting a Wi-Fi extender or upgrading to a mesh network topology to extend your network’s reach and ensure smooth distribution to all areas of your home.
Power Cycle Your Router
If you’ve been struggling to get things up and running, don’t fret. We’ve got a straightforward fix that’s likely to do the trick. It’s called power cycling your router, and it’s simpler than you might think.
First, just unplug your router from the wall. Give it about 30 seconds to a minute, then plug it back in. It might seem too easy, but this little trick can clear up a whole range of issues.
Power cycling refreshes your connection to the network, which can iron out those pesky bugs and glitches causing trouble. While we’re talking about your router, there’s one more thing to consider.
Sometimes, connection problems stem from your router being too far away from the device it’s trying to reach. If that’s the case, try reducing the distance between your router and the LED bulbs or whatever you’re connecting.
Turn Off Your VPN
If your phone has a VPN activated, it could be causing the issue. When the VPN is enabled, your Wi-Fi and LED bulbs might face communication problems.
To eliminate this possibility, go to your phone settings and turn off the VPN. After doing that, attempt to reconnect the bulbs, and everything should work smoothly.
Resetting the Feit Smart Bulb
This process restores the bulb to its factory settings, erasing previous connections and allowing for a fresh setup. It proves effective in resolving persistent problems and ensures optimal performance in your smart home setup. Resetting the Feit Smart Bulb can be done by following these steps:
- Turn off your bulb and wait for 10 seconds.
- Turn your bulb on for 2 seconds.
- Turn it off for 2 seconds with your bulb.
- Repeat steps 2 and 3 four more times to turn off.
- After the fifth cycle, the bulb will flash, indicating a successful reset.
- Once reset, the Feit Smart Bulb is ready to be reconnected to your network and controlled as desired.
Final Thoughts
Sometimes, even after trying various fixes, the bulbs might still refuse to work. When this occurs, it usually indicates a more serious issue that requires specialized expertise to resolve.
At this stage, your best course of action is to reach out to Feit’s customer services team. They will likely advise you to get a replacement.
If your device is still under warranty, obtaining a free replacement should be straightforward.
